Automated Sales Follow-Up: Run a Routine Over a List

Set up automated follow-up for a list of contacts: build the nodes yourself or let Relationship Assist pace each person, set a goal, check the first drafts and approve what Lumo writes.

Core Workflow
Updated Nov 19, 20268 min readBy Sebastian Streiffert
Access
Permission to create Routines, because a Routine over a list reaches people.
Lumo
Drafts, Relationship Assist and Lumo review need a plan with Lumo. Building the nodes yourself works on every plan.
Credits
Drafting, Lumo review and reasoning nodes use workspace Lumo credits.
Where
Routines

What automated follow-up does

A Routine that starts over a list works through each person on that list, over days or weeks, until they reach the goal you set: a reply, a booked meeting, or simply staying in touch. Lumo writes each message from what your CRM knows about the person, and the draft waits in the Feed for your approval. An admin can allow automatic sending in Lumo settings.

It is a Routine like any other: same Routines page, same History, same nodes. Only the Start is a list. For Routines that start on an event or a schedule, see Routines.

Lumenbase Training - Lists & RoutinesYouTube

Before you begin

  • A list of the people to follow up with. See Lists.
  • A connected mailbox that can send, if the Routine sends email. Turning it on says so when one is missing.
  • The browser extension, if the Routine uses LinkedIn.

Create a Routine over a list

1

Open New Routine

Go to Routines and click New Routine.

2

Pick how to start

Pick Blank and choose Over a list on the Start, pick a template under Work through a list, or pick Create with Lumo and describe who to reach and why.

3

Choose how it works

The Routine asks How should this Routine work?

ChoiceWhat it doesSteps that follow
Build the nodesYou place the messages, waits and conditions. Every person goes through the same nodes.Nodes, Goal, Review + launch
Relationship AssistLumo paces each person toward the goal from your approach, instead of fixed nodes.Audience, Strategy, Goal, Plan, Lumo review, Review + launch (plus Ties for keep-in-touch goals)
4

Launch

Click Launch Routine, then Review and start, which checks each person on the list before anyone is contacted.

Your work is saved as a private draft while you go. Close it and pick it up again from Drafts on the Routines page.

How each person moves through it

  • A message node writes to the person. The draft waits in the Feed until someone approves it, unless review is off for that node.
  • A Wait node can wait a set time, or until the person replies or opens, up to a limit, then takes the matching path.
  • A person stops when they meet the goal, leave the list, or reach the follow-up limit or the inactivity freeze in Configuration. A reply also stops proactive follow-ups for that person.
  • Suppression, do-not-contact and pacing per mailbox apply to every send, whichever Routine it comes from.

Write the approach

With Relationship Assist, the Plan step holds the approach Lumo drafts from: plain text in sections headed like == SITUATION ==. Five sections are standard:

SectionWhat to put in it
SITUATIONWho the contacts are, how they were sourced, what has happened so far.
APPROACHThe angle and framing, and how to behave once a contact replies or objects.
CHANNELEmail vs LinkedIn posture: which leads and when to switch.
PRIORITIZATIONObservable signals that mark a contact for extra attention.
CONSTRAINTSHard content rules every draft must respect.
Example: following up after a webinar
== SITUATION ==
Heads of sales at Nordic SaaS companies, 50 to 500 staff. Joined our
webinar on pipeline reviews last week. Most have not replied yet.

== APPROACH ==
Peer to peer. Lead with one useful idea for their team, not our product.
If they reply with a question, answer it before asking for a call.

== CHANNEL ==
Open on LinkedIn. Switch to email once they have replied once.

== PRIORITIZATION ==
Move faster for anyone who viewed the pricing page this week.

== CONSTRAINTS ==
No discounts. No more than 90 words per message.
  • Name what to avoid as clearly as what to do.
  • Keep one approach per Routine. Make a second Routine for a second approach.
  • Change the text when drafts miss. Then re-draft waiting cards from the Feed.

Add more lists

Open the list, then its ... menu at the top right, and choose Link Routine. The picker offers the Routines the list is not in yet. A static list can be in any number of Routines, and a person can be in more than one.

The Routine page

Click a Routine on the Routines page to open it.

The tabs at the top of a Routine that starts over a list.
TabWhat it holds
OverviewWhere people are, by node or by milestone, who can be reached, and how recently each was touched.
Goal & TrajectoryWhat done means for a person, checked from CRM data, and how people are moving toward it.
DetailsThe nodes, when the Routine has them.
ConfigurationWhether it runs, and how it reaches, paces and drafts.
Associated ListsThe lists this Routine works through, and each person on them.

Configuration

Open the Routine, then Configuration. Which sections show depends on how the Routine works. Hover any setting in the app for what it does.

SectionSettings
ReachView profile before connecting, View profile before sending message. Not shown when you build the nodes: each node sets its own channel.
Email readinessWhether a mailbox can send for this Routine.
RhythmEnd Routine, Follow-ups before it ends, Max daily follow-ups. Not shown for Relationship Assist or built nodes.
Follow-up result, or Lumo defaultsOpens conversations, Tone, Draft in, Voice.
SignalsActivity monitoring, Fetch recent posts on connect, Keep posts fresh, Meeting reminders.
Shared limitsMax daily follow-ups, for a Routine that builds its nodes.
Settings marked All Routines, such as Max daily follow-ups and Contacts monitored, are workspace-wide, not this Routine's alone.

Check the first drafts

A new Routine writes a few sample drafts first and holds the rest. Until you release them, the warnings bar at the top of the Feed shows a calibration icon. Hover it to see which Routine is waiting.

1 warning

The warnings bar at the top of the Feed.

Read the samples. If they are right, click Draft the rest in that warning. If not, change the approach first.

Limits

  • A Routine with LinkedIn message nodes can include up to 100 people.
  • LinkedIn actions are done by you through the browser extension, then confirmed.
  • Activity monitoring counts people across every Routine that has it on. Above 200, each one is checked less often.
  • Lumenbase does not buy or bundle contact lists. Bring your own, or connect a provider.

Troubleshooting

No drafts arrive

Check that the Routine is on, that the people are not already done on Goal & Trajectory, and that the Feed is not holding drafts for the first-drafts check.

Turn on says to finish email setup

No mailbox can send for this Routine. Connect or resume one, then turn it on again.

The list is dynamic, or your role cannot edit it. Link a static list, or ask someone who can edit it.

The Feed says a Routine may be miscalibrated

Lumo paused it because its drafts kept being changed. Click Review, edit the approach, then Save & resume.

Quick reference

Open Routines
Routines
Create one
RoutinesNew Routine
Add a list
List page...Link Routine
Settings
RoutineConfiguration
Set the goal
RoutineGoal & Trajectory
See the drafts
Feed

Frequently asked questions

How do I follow up automatically with a list of contacts?

Create a Routine that starts over that list: open Routines, click New Routine, pick Blank and choose Over a list, or pick a template under Work through a list. Each person on the list then gets the Routine's nodes in turn, and the drafts wait in the Feed for your approval.

What is Relationship Assist?

A way to run a Routine over a list where Lumo paces each person for you instead of following fixed nodes. You set the goal and the approach; Lumo decides when to reach out and drafts each message for approval.

Can one list be in more than one Routine?

Yes. A list can be linked to several Routines, and a person can be in more than one. Pacing per mailbox, suppression and review still apply to every send.

When does a Routine stop following up with someone?

When they meet the Routine's goal, such as a reply or a booked meeting, when they leave the list, or when the follow-up limit or inactivity freeze in Configuration is reached. A reply also stops proactive follow-ups for that person.

Was this article helpful?