Sending mailboxes and outreach limits
Add send-only outreach mailboxes, set daily limits, ramp-up and sending hours, and choose which mailboxes Routines and Lumo send from.
- Who
- Every member, for their own mailboxes, at SettingsPersonalEmail.
- Workspace side
- SettingsWorkspaceEmail is for admins. Members who manage email campaigns see Sending domains.
- Providers
- Google, Microsoft 365 work or school accounts, or any mail server with SMTP and IMAP.
- What it limits
- Automated mail from Routines and Lumo. Mail you write yourself is not counted.
Add a Google or Microsoft mailbox
Add an SMTP mailbox
The SMTP mailbox then shows in the Mailboxes table by itself. Change it later at SettingsPersonalMy integrationsCustom Email (SMTP).
Set limits and sending hours
Workspace maximum: 150
Day 1: 10, Day 7: 40
A new mailbox starts with these workspace defaults. The rules behind them are under How sending works below.
Choose mailboxes for Routines
Every mailbox starts as Yes, your everyday one too. While your everyday mailbox sends Routine mail, this warning sits above the table. Hover its (i) for the reasons.
Your everyday mailbox sends Routine mail - Spam flags and complaints hurt your main domain, which also carries customer mail, invoices and proposals.
- Your provider can limit or suspend the account you rely on every day.
- One inbox can only send a small safe volume per day.
- Outreach replies and bounces mix into your daily inbox.
Everyday and outreach mailboxes
The Role column says what each mailbox is. Your everyday Gmail or Outlook and each SMTP mailbox show up in the table by themselves.
| Role | What it is | Connected at | Replies come in by |
|---|---|---|---|
| Everyday | The Gmail or Outlook account your mail and calendar sync from | SettingsPersonalMy integrations | Mail sync |
| Outreach | An extra Google or Microsoft account that only sends automated mail | SettingsPersonalEmailAdd mailbox | Reply watcher |
| SMTP | A mailbox on your own mail server | SettingsPersonalMy integrationsCustom Email (SMTP) | IMAP. Without it: Not detected. |
How the everyday connection syncs is in Email Integration Setup.
The Mailboxes table
| Address | Role | Today | Domain | Status |
|---|---|---|---|---|
| alex@northwind.io | Everyday | 3 / 40Full volume | OK
| Active |
| alex@northwind-mail.com | Outreach | 12 / 20Ramp-up day 3 | Needs fixing
| Active |
| alex@northwind-hello.com | Outreach | 0 / 10Ramp-up day 1 | Not checked yet | Paused |
- 1Today: Sent today out of today's limit, with the ramp-up day
- 2Domain: OK, Needs fixing or Not checked yet
- 3Status: Active, Paused, Needs attention or Disconnected
Sending hours and Used for Routines are columns too. Provider and Aliases are in the column menu. The ... menu at the end of a row holds every action:
| Action | What it does |
|---|---|
| Edit limits | Daily limit, ramp-up, sending days and hours, time zone and gap. |
| Edit aliases | Other addresses you send and receive as. Up to 20 per mailbox. |
| Pause / Resume | Stops or restarts all automated mail from this mailbox. |
| Use for Routines / Stop using for Routines | Whether Routines may pick this mailbox. |
| Check domain | Checks SPF, DKIM and DMARC now. |
| Reconnect | Outreach mailboxes that are not active. Signs in again. |
| Connection settings | Everyday and SMTP mailboxes. Opens the page where the connection lives. |
| Disconnect mailbox | Outreach mailboxes. Stops sending and reply watching. Asks first. |
How sending works
| Rule | What happens |
|---|---|
| Ramp-up | A mailbox starts at Start per day and adds Increase per sending day until it reaches the daily limit. |
| Sending day | A day the mailbox sent automated mail, counted over the last 90 days. Idle days do not count. |
| Workspace ramp-up | While the workspace ramp-up is on, you cannot turn yours off. You can ramp slower, not faster. |
| Limit reached | The next Routine email waits for the next sending day. It goes out by itself, with no new approval. |
| Outside the window | The email waits for the window to open. It does not move to another mailbox. |
| Gap | Lumenbase adds a small random extra to the gap. The gap is never shorter than the workspace default. |
| Which mailbox | A contact's first email uses the mailbox with the most room left today. Later emails use the same one. |
| Send from | In a Routine, the owner picks My Routine mailboxes (every mailbox set to Yes) or Choose mailboxes. |
| Paused mailbox | Contacts already on it stay on it. Their sends wait until you resume it. |
| Replies | The reply watcher checks outreach mailboxes about every 5 minutes, only in threads Lumenbase sent in the last 30 days. |
| Bounces | A hard bounce adds the address to Opt-outs. Automatic replies are skipped. |
| Aliases | Mail from an alias syncs as yours. Reply All leaves it out. A teammate's address cannot be your alias. |
Domain check
The Domain column checks the DNS records of the domain a mailbox sends from, once a day. Missing records send outreach to spam. Hover the (i) to see which record fails and why.
| Record | What it needs |
|---|---|
| SPF | One record. For Google or Microsoft it must include include:_spf.google.com or include:spf.protection.outlook.com. |
| DKIM | A key under the selector google (Google) or selector1 or selector2 (Microsoft). SMTP: common selectors. |
| DMARC | One record with a policy. |
Workspace settings
SettingsWorkspaceEmail has five tabs.
| Tab | What it holds |
|---|---|
| Overview | Two cards: Campaigns send from your domain, and Routines send from team mailboxes. |
| Sending domains | The domain email campaigns send from. Routines do not use it. |
| Outreach rules | Maximum per mailbox per day, Defaults for new mailboxes, and Footer on automated mail. |
| Opt-outs | Addresses automated mail skips. Add opt-out adds one by hand. |
| Team mailboxes | Every member's mailboxes, read-only. |
New defaults apply to mailboxes added after you click Save rules. The maximum and the gap apply to every mailbox. An opt-out a person made themselves (STOP reply, spam complaint, unsubscribe) cannot be removed.
Settings
| Setting | Where | Default | Applies to |
|---|---|---|---|
| Daily limit | Edit limits | 40 | One mailbox |
| Slow ramp-up | Edit limits | On: 10 per day, plus 5 per sending day | One mailbox |
| Sending days, From, Until | Edit limits | Monday to Friday, 08:00 to 18:00 | One mailbox |
| Time zone | Edit limits | Profile time zone (UTC if none) | One mailbox |
| Minimum gap between sends | Edit limits | 2 minutes | One mailbox |
| Used for Routines | Row ... menu | Yes | One mailbox |
| Default mailbox for one-to-one mail | SettingsPersonalEmail, Sending preferences | Automatic: Gmail, then Outlook, then SMTP | You |
| Let Lumo send without asking | Sending preferences | Off | You |
| Let Routines send LinkedIn messages without review | Sending preferences | Off | You |
| Maximum per mailbox per day | SettingsWorkspaceEmailOutreach rules | 150 | Workspace |
| Footer on automated mail | Outreach rules | Opt-out line | Workspace |
- An outreach mailbox picked as the default mailbox is used by Lumo. Mail you write yourself still goes from your everyday mailbox.
- Let Lumo send without asking also needs Lumo for the team and Automatic sending on in the workspace, and Lumo not paused for you. Only an admin can turn on the workspace ones.
- The Opt-out line adds "Reply STOP to stop receiving automated messages." Automated mail always carries it.
Limits
- One everyday Google and one everyday Microsoft connection per person. Every extra mailbox only sends.
- Lumenbase never imports an outreach mailbox's inbox, sent mail or calendar.
- Other mail in an outreach mailbox, including mail you send from it by hand, never reaches Lumenbase.
- A kept reply shows on the contact's timeline and in Communication. An IMAP reply for SMTP shows on the timeline only.
- The compose window in Communication cannot send from an outreach mailbox.
- No shared mailbox and no team inbox. Every mailbox belongs to one person.
Troubleshooting
Adding an outreach mailbox fails
- Allow pop-ups for Lumenbase, then try again.
- Sign in with a different account than your everyday one.
- "This address is already a mailbox in your workspace" means you or a teammate added it.
- Connect again and accept every permission.
- Still failing? Try later, or add it with SMTP and IMAP.
A Routine email has not gone out
- Check Today. At its limit, the mailbox sends on the next sending day.
- Check Sending hours. Mail waits for the window to open.
- Check Status. Paused, Needs attention and Disconnected stop sending.
- Check that a mailbox is set to Yes in Used for Routines, or chosen in the Routine.
- A contact keeps the mailbox of their first email. Reconnect that mailbox if it is disconnected.
Status says Needs attention
- Hover the (i) next to Status. It says what stopped the mailbox.
- Everyday mailbox: turn email sync on in its Connection settings.
- SMTP mailbox: open Connection settings and test the connection.
- Outreach mailbox: click Reconnect in its ... menu.
Domain says Needs fixing
- Hover the (i) in the Domain column to see the failing record.
- Fix it at your DNS host. On Microsoft 365, also turn DKIM on for the domain.
- Click Check domain. DNS changes can take a while.
Replies to an outreach mailbox are missing
- Wait 5 minutes for the reply watcher.
- The reply must be in the thread Lumenbase sent, from an address it went to.
- Threads are watched for 30 days after the last send.
- For SMTP, add IMAP on the Custom Email (SMTP) page.
Daily limit will not go higher
- Ask an admin to raise Maximum per mailbox per day in Outreach rules.
- While ramp-up runs, today's limit stays below the daily limit. Wait for Full volume.
Quick Reference
- Your mailboxes
- SettingsPersonalEmail
- Add outreach mailbox
- SettingsPersonalEmailAdd mailbox
- Limits and hours
- Mailbox row...Edit limits
- SMTP mailboxes
- SettingsPersonalMy integrationsCustom Email (SMTP)
- Workspace rules
- SettingsWorkspaceEmailOutreach rules
- Opt-outs
- SettingsWorkspaceEmailOpt-outs
Frequently asked questions
How is an outreach mailbox different from my connected Gmail or Outlook?
Your everyday Gmail or Outlook, connected at Settings, Personal, My integrations, runs the full mail and calendar sync. You can have one Google and one Microsoft connection. An outreach mailbox, added at Settings, Personal, Email, only sends automated mail. Lumenbase never imports its inbox. It only reads replies and bounces in the threads it sent from that mailbox.
Does mail from an outreach mailbox show in Communication?
Only a reply to mail Lumenbase sent from a Google or Microsoft outreach mailbox. It shows on the contact's timeline and as a Gmail or Outlook thread in Communication. All other mail in that mailbox never reaches Lumenbase. Replies picked up over IMAP for an SMTP mailbox show on the timeline only.
How many emails does a new mailbox send per day?
With the workspace defaults, 10 on its first sending day, 5 more on each later sending day, up to a daily limit of 40. No mailbox can go above the workspace maximum, 150 unless an admin changes it. Change the numbers under Edit limits in the mailbox's menu.
When does automated mail go out?
Only inside the mailbox's sending window. The default is Monday to Friday, 08:00 to 18:00 in your profile time zone, with at least 2 minutes between sends. Mail due outside the window waits for it to open.
Can my team share a mailbox or a team inbox?
No. Every mailbox belongs to one person, and there is no shared mailbox or shared team inbox. Admins can see every member's mailboxes, read-only, at Settings, Workspace, Email, Team mailboxes.
Was this article helpful?
